Testing by a certified laboratory should be conducted to verify that the installation meets a Class A fire rating and to guarantee compliance with all applicable codes. Before you start, find out how to protect yourself and your family by contacting the National Lead Information Hotline at 1-800-424-LEAD or log on to Roman Products, LLC does not endorse the use of any product in an installation that does not meet a Class A fire rating or any applicable code. Clean up carefully with a HEPA vacuum and a wet mop. Wear a NIOSH-approved respirator to control lead exposure. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. If you scrape, sand, or remove old paint, you may release lead dust. Additional effort may be required if the adhesive is allowed to contact the surface of embossed or textured vinyls. Book wallcovering according to the wallcovering manufacturer’s instructions.Ĭlean-Up: Before the adhesive dries, remove any excess with clean water. Avoid contact with the surface of embossed, textured or delicate wallcoverings. Apply an even coat of adhesive with a roller or brush. Before proceeding with any unusual conditions, consult your adhesive or wallcovering supplier.Īpplication Method: Use only when the room temperature is above 50☏. Check surfaces for paint bonding, loose wallcoverings, damaged wall-board or plaster. Surface Preparation: Surface must be free from grease and other residues, dry, smooth and structurally sound.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |